Printable Heat Transfer Vinyl

MinMax supplies Printable heat transfer vinyl to meet customers’ characterization and creative acquirement. MinMax printable heat transfer vinyl have more base colors to choose. With MinMax TPU hot melt adhesive film, it will permanent adhesive turned to working surface.

Standard Packing is width 1.2Meter (47″) and length 50Meter (54.68yd) per roll. MinMax always supplies Customized Width, such as width 30.5CM(12″) and width 51CM(20″) are pop cutting sizes for our customers.

MinMax Also have pattern printed service. If you want to sold your onw design heat transfer vinyl, please kindly contact our sale rep for details..

Ask A Free Sample

What we printed before:

Previous Next

1 2 3 4

Specification Application Videos Contact

Previous Next

Item Name:	Printable Heat Transfer Vinyl	Item No.:	MPC(Color Code)
Thickness	0.1mm	Standard Width:	1200mm ( 47″ )
Standard Length:	50 M(54.68yd)/Roll	Available Width:	10mm～1200mm ( 0.38″～47″ )

Material: Release paper + Printable Colored TPU + TPU hot melt

Applies to:

100% cotton

100% polyester

Poly/cotton blends

Leather

Temperature resistance: 60℃

Water-wash resistivity: Under 60℃

You can use a standard inkjet printer or a sublimation printer for the image printed. Then put it on the woking fabric surface and make sure the patter printed side is faceing you. Put a teflon sheet, parchment paper or a thin towel cover your design during heat working.

MinMax Printable Heat Transfer Vinyl is easy to weed and work with. This durable material can also be applied with a heat press or home iron.

Home Iron	Heat Press
1. Set your iron to the highest setting and firmly press your design for 16 seconds. No steam. Don’t slide your iron, instead apply firm pressure in sections until your design is adhered. 2. Give it time to cool before removing carrier sheet. 3. Cover your design with Teflon sheet, parchment paper or a thin towel and do a final press for at least 15 seconds.	1. Set heat press between 140℃ and 150℃(305° F) (this may vary as every heat press is different), Pressure 3Kg/c㎡. 2. Press design for 10-16 seconds. When doing layers, press the first layers for 5-6 seconds before pressing last layer for full 10-16 seconds. Be sure to always cover any with a Teflon sheet, parchment paper or thin towel 3. Cold peel. 4. Cover your design with Teflon sheet, parchment paper or a thin towel and do a final press for 10-16 seconds.