Solid Color Heat Transfer Vinyl

MinMax supplies vast solid color heat transfer vinyl to meet different fabrics acquirement. No matter you work with T-shirts, bags, cushion covers, pants, jackets, or your material is 100% cotton, 100% polyester, or poly/cotton blend fabrics, MinMax solid color heat transfer vinyl will permanent adhesive turned to the surface.

Standard Packing is width 1.2Meter (47″) and length 50Meter (54.68yd) per roll. MinMax always supplies Customized Width, such as width 30.5CM(12″) and width 51CM(20″) are pop cutting sizes for our customers.

How many colors we can producing? Please open the Pantone Color Book, we can make any colors base on Pantone Code.

Ask A Free Sample

Hot-rate Color:

1 2 3 4 5

Specification Application Videos Contact

Item Name:	Solid Color Heat Transfer Vinyl	Item No.:	MSC(Color Code)
Thickness	0.12mm, 0.15mm, Customized	Standard Width:	1200mm ( 47″ )
Standard Length:	50 M(54.68yd)/Roll	Available Width:	10mm～1200mm ( 0.38″～47″ )

Material: Release paper + Colored TPU + TPU hot melt + Protect film

Applies to:

100% cotton

100% polyester

Poly/cotton blends

Leather

Temperature resistance: 60℃

Water-wash resistivity: Under 60℃

Peel off the adhesive side protective film, put it on the woking fabric surface. Now the color side release paper is faceing you.

Solid Color Heat Transfer Vinyl is easy to weed and work with. This durable material can also be applied with a heat press or home iron.

Home Iron	Heat Press
1. Set your iron to the highest setting and firmly press your design for 15 seconds. No steam. Don’t slide your iron, instead apply firm pressure in sections until your design is adhered. 2. Give it time to cool before removing carrier sheet. 3. Cover your design with Teflon sheet, parchment paper or a thin towel and do a final press for at least 15 seconds.	1. Set heat press between 140℃ and 150℃(305° F) (this may vary as every heat press is different), Pressure 3Kg/c㎡. 2. Press design for 10-15 seconds. When doing layers, press the first layers for 5-6 seconds before pressing last layer for full 10-15 seconds. Be sure to always cover any with a Teflon sheet, parchment paper or thin towel 3. Cold peel. 4. Cover your design with Teflon sheet, parchment paper or a thin towel and do a final press for 10-15 seconds.