Reflective Heat Transfer Vinyl

MinMax supplies more colorful reflective heat transfer vinyls to meet different fabrics acquirement. You can have more colorful design for day and safety reflective for dark. No matter your material is 100% cotton, 100% polyester, or poly/cotton blend fabrics, MinMax reflective heat transfer vinyl will permanent adhesive turned to the surface.

Standard Packing is width 1 Meter (39″) and length 50Meter (54.68yd) per roll. MinMax always supplies Customized Width, such as width 30.5CM(12″) and width 51CM(20″) are pop cutting sizes for our customers.

Ask A Free Sample

Hot-rate Color:

Specification Application Videos Contact

Item Name:	Reflective heat transfer vinyl	Item No.:	MRF(Color Code)
Thickness	0.15mm, Customized	Standard Width:	1000mm ( 39″ )
Standard Length:	50 M(54.68yd)/Roll	Available Width:	10mm～1000mm ( 0.38″～39″ )

Material: Release paper + Reflective material + TPU hot melt + Protect film

Applies to:

100% cotton

100% polyester

Poly/cotton blends

Leather

Temperature resistance: 60℃

Water-wash resistivity: Under 60℃

Peel off the adhesive side protective film, put it on the woking fabric surface. Now the reflective side release paper is faceing you.

Reflective Heat Transfer Vinyl is easy to weed and work with. This durable material can also be applied with a heat press or home iron.

Home Iron	Heat Press
1. Set your iron to the highest setting and firmly press your design for 12 seconds. No steam. Don’t slide your iron, instead apply firm pressure in sections until your design is adhered. 2. Give it time to cool before removing carrier sheet. 3. Cover your design with Teflon sheet, parchment paper or a thin towel and do a final press for at least 15 seconds.	1. Set heat press between 130℃ and 140℃(284° F) (this may vary as every heat press is different), Pressure 3Kg/c㎡. 2. Press design for 8-12 seconds. When doing layers, press the first layers for 4-5 seconds before pressing last layer for full 8-12 seconds. Be sure to always cover any with a Teflon sheet, parchment paper or thin towel 3. Cold peel. 4. Cover your design with Teflon sheet, parchment paper or a thin towel and do a final press for 8-12 seconds.