Stretch heat transfer vinyl

MinMax supplies stretch heat transfer vinyl to meet flexible fabrics‘ acquirement. MinMax stretch heat transfer vinyl will adhere firm to the fabrics and keep the flexible fabrics‘ elasticity unaffected.

Standard Packing is width 1.2Meter (47″) and length 50Meter (54.68yd) per roll. MinMax always supplies Customized Width, such as width 30.5CM(12″) and width 51CM(20″) are pop cutting sizes for our customers.

Ask A Free Sample

Hot-rate Color:

Specification Application Videos Contact

Previous Next

Item Name:	Stretch Heat Transfer Vinyl	Item No.:	MST(Color Code)
Thickness	0.1mm	Standard Width:	1200mm ( 47″ )
Standard Length:	50 M(54.68yd)/Roll	Available Width:	10mm～1200mm ( 0.38″～47″ )

Material: Release paper + Stretch Colored TPU + Stretch TPU hot melt + Protect film

Applies to:

Highly Flexible Fabric

Temperature resistance: 60℃

Water-wash resistivity: Under 60℃

Peel off the adhesive side protective film, put it on the woking fabric surface. Now the color side release paper is faceing you.

MinMax Stretch Heat Transfer Vinyl is easy to weed and work with. This durable material can also be applied with a heat press or home iron.

Home Iron	Heat Press
1. Set your iron to the highest setting and firmly press your design for 16 seconds. No steam. Don’t slide your iron, instead apply firm pressure in sections until your design is adhered. 2. Give it time to cool before removing carrier sheet. 3. Cover your design with Teflon sheet, parchment paper or a thin towel and do a final press for at least 15 seconds.	1. Set heat press between 140℃ and 150℃(305° F) (this may vary as every heat press is different), Pressure 3Kg/c㎡. 2. Press design for 10-16 seconds. When doing layers, press the first layers for 5-6 seconds before pressing last layer for full 10-16 seconds. Be sure to always cover any with a Teflon sheet, parchment paper or thin towel 3. Cold peel. 4. Cover your design with Teflon sheet, parchment paper or a thin towel and do a final press for 10-16 seconds.